Soudabond 370 Fine Spray Transparent 22,1l

Soudabond 370 Fine Spray

Add to quick access

Contact adhesive

Soudabond 370 Fine Spray is a ready-to-use, universal contact adhesive based on synthetic rubbers. It is applied two-sided and carried in a canister for immediate spraying without extra spray installation.

Open technical data sheet

Shown product

Soudabond 370 Fine Spray Transparent 22,1l

Other product variants

What are you looking for?

Featured properties

  • Fast drying process
  • Fast strength build-up
  • Immediately fixed
  • Moisture resistant
  • Chemical resistant against light acids and bases
  • Doesn't contain toluene- and methylene chloride
  • Wide application area
  • Good adhesion to many materials
  • Ready to use and very user friendly
  • Efficient spraying - no loss of product
  • Portable, no electricity or compressed air needed
  • maintenance-free

Applications

  • Fast drying process
  • Fast strength build-up
  • Immediately fixed
  • Moisture resistant
  • Chemical resistant against light acids and bases
  • Doesn't contain toluene- and methylene chloride
  • Wide application area
  • Good adhesion to many materials
  • Ready to use and very user friendly
  • Efficient spraying - no loss of product
  • Portable, no electricity or compressed air needed
  • maintenance-free

Instructions

  • Adjust the desirable spray pattern by choosing the correct nozzle and adjusting the ErgoGrip gun. Apply the adhesive two-sided with the ErgoGrip gun. Make sure the adhesive is nebulized equally. At least 80% should be covered. For strong porous materials (plaster, concrete, …) a second layer can be applied after the first layer (wait for +/- 15 to 20 min). About 1-2 min, depending on the circumstances, let it dry and close maximum 30 min after applying. Immediate adhesion. Then, press well with a pressure roller, in a press during 15s or bat down with a rubber hammer. After usage, immediately close the ErgoGrip gun.