HMX Sanitary Pro

Add to quick access
Hydro polymer sanitary sealant

HMX Sanitary PRO is a high performance elastic sanitary sealant that is based on our revolutionary HMX technology. The product is especially designed for sanitary applications and combines the highest sanitary class XS1 (the highest resistance against mould) with a superior adhesion to many substrates used in sanitary rooms. Furthermore, HMX Sanitary PRO is easy to work with, more sustainable, odourless and can be used on natural stone.

Open technical data sheet
Shown product

HMX Sanitary Pro White 300ml

What are you looking for?
    Featured properties
    • Excellent & unique tooling (no threading, no slump, easy cleaning)
    • Impervous to mould
    • Permanently elastic after curing
    • Very good adhesion to many substrates (tiles, bathtubs,...)
    • Excellent moisture resistance
    • Can be used on natural stone
    • Excellent paintability
    • Odourless
    • A more sustainable solution: doesn't contain hazardous substrates (tin-free, phthalate-free, solvent-free)
    • EC-1 Plus label: very low emission
    Assets
    DoP
    DoP 231849 Soudal, HMX Sanitary Pro, English
    Technical data sheet
    TDS Soudal, HMX Sanitary Pro, English
    Applications
    • Sealing in kitchens
    • Sealing in bathrooms
    Instructions
    • Surfaces should be clean, dry and free of dust and grease. Add tape (if necessary) and apply the sealant in the joint with a manual, pneumatic or accu caulking gun at temperatures between +5°C and +35°C. Spray a little bit of pure water on a spatula and smoothen the joint. Remove tape.

      For an optimal result:
      - Avoid using too much water when tooling the joint. Use clear water to moisten the spatula (not a soapy solution) and do not spray directly on the joint.
      - Tooling in one time should be enough for a smooth and perfect result.
      - Skin formation will start after 15 minutes. Taking a bath/shower will be
      possible at the earliest 1 hour after application. The sealant will reach full mechanical properties after 7 days of curing (6 mm joint / 20°C / 50% RH). Avoid manipulating the sealant until fully cured.