Soudagum Hydro Kit

Coating

The 1kg Soudagum Hydro kit, contains two foil bags of 500g Soudagum Hydro, a small bucket, application brush, small reinforcing non-woven fleece (15cm x 30cm) and a pair of disposable gloves. The solvent free Waterproof Protective Coating is suitable for a broad range of applications from roof & gutter repair to general sealing and protection of interior and exterior joints, gaps and cracks. Can be reinforced with a geotextile (110g/m2) – Soudatextile - between two layers of the liquid coating.

Open technical data sheet

Shown product

Soudagum Hydro Kit 1kg

Featured properties

Ready to use, single-component waterproof coating
Solvent and Isocyanate free
Excellent workability, can be applied in 2 layers
Rain resistant 2 hours after application
Excellent ahesion on most common substrates
Good UV and weather resistance
Paintable

Assets

Main image

Technical data sheet

TDS Soudal, Soudagum Hydro, English

Technical data sheet

TDS Soudal, Soudagum Hydro Kit, English

Applications

For both indoor and outdoor applications where a protective waterproof coating is required. Suitable for the waterproofing of skylights, dome lights, pipe collars and wall breakthroughs. Waterproofing and repair of roofs and metal/plastic guttering. Repair and renovation of rooftops (pans, slats, zinc), roof edges and chimney flashings. Treatment of lead and zinc corrosion. For protection and renovation of wooden constructions, including underground garden structures to protect against exposure to moisture.

Instructions

Surfaces must be free of dust and grease. Remove all traces of loose existing coating material. Stir Soudagum Hydro in the container before using. Apply by roller or brush in 2 layers to a thickness of 2mm. The second layer cannot be applied until the first has dried completely. The membrane can be reinforced with a non-woven fleece (Soudatextile). If so, it’s recommended to be used between two coats. The fleece should be submerged into the first coat while it is still wet.