LVT 30FW 13kg

LVT 30FW

Add to quick access

Water-based LVT adhesive

LVT 30FW is a universal, ready to use, solvent free dispersion adhesive for bonding of elastic flooring materials to flat, absorbent surfaces.

Open technical data sheet

Shown product

LVT 30FW 13kg

What are you looking for?

Featured properties

  • Ready to use solvent-free dispersion adhesive
  • High initial tack
  • Short evaporation time, approx. 10 minutes
  • Long open time, approx. 30 minutes
  • Very high final strength
  • Can be walked over immediately after application
  • Heat resistant, can be used with under floor heating
  • EC-1 PLUS label: very low emissions
  • Complies with ISO 22636: Adhesives for floor coverings

Applications

  • Used for the bonding of flexible flooring materials such as LVT (luxury vinyl tiles) flooring, PVC tiles and cushion vinyl. Also suitable for rubber floorings, fibre bonded and carpet tiles, textile carpets and linoleum onto porous, flat surfaces such as concrete (screed), levelling compounds and timber.

Instructions

  • Draw starting axes and determine the pattern.Stir well before using. Apply LVT 30FW with the correct trowel on the sufficient surface. Do not apply more adhesive than you can use within 10-20 minutes. Leave for 10 minutes, then insert the flooring material (vinyl, PVC, carpet with foam backing) into the still wet adhesive. Make sure that the bond is tension free and that there are no air pockets between the adhesive layer and the flooring material. Immediately rub, press or roll the flooring well into the whole surface to achieve a good adhesive transfer. For further information, please refer to the technical data sheet.
Accessories
Swipex Wipes
Swipex Wipes