Trade Pipe & Plumbing Gunfoam 500ml

Trade Pipe & Plumbing Gunfoam

Shown product

Trade Pipe & Plumbing Gunfoam 500ml

Other product variants

What are you looking for?

Instructions

  • Shake the can well for at least 30 seconds. Screw the aerosol tight. Adjust the setscrew and spray the foam by pulling the trigger. Gaps are to be filled partly, since foam will further expand. Repeat shaking regularly during application. If you have to work in layers repeat moistening after each layer. Remove spilled, not hardened foam with Soudal GUNCLEANER. Cured foam can only be removed mechanically or with Soudal PU-Remover. The aerosol with the spraygun can be put away without any risk of hardening. If no new aerosol is fixed on the spraygun, clean the gun thoroughly with Soudal GUNCLEANER. Slightly humidifying of the surfaces gives faster curing and a better cell structure. Application temperature: +5°C to +30°C. Preferably store upright.