Glasfibre blanket

Fibreglass mat for body repair

Non-woven fibre glass matting tissue to be used with Poly Liquid or Polyset for the strengthening of surface repairs or the preparation of new parts. Available in 0.5m² and 1m² tissue.

Open technical data sheet

Shown product

Glasfibre blanket

Featured properties

To be used in combination with Poly Liquid
Non-woven fibreglass matting
Easy to cut
It is possible to apply multiple layers
Different pack sizes available

Assets

Main image

Technical data sheet

TDS Soudal, Glasfibre blanket, English

Applications

Non-woven fibreglass blanket to be used in combination with Poly Liquid. Filling of scratches, tears and dents in metal plates, including zinc and galvanized steel. Reparing scratches and dents in cars. Repairs of metal, polyester and wooden surfaces.

Instructions

Cut the fiberglass to the right size with ± 3 cm overlap on all sides. Fray out the overlapping edges to achieve a smooth transition. Mix the required amount of Poly Liquid with 2 to 4% hardener in the supplied cup until a homogeneous mixture without color differences is obtained. Transfer by means of the brush a portion of the mixture to the substrate. Soak the fiberglass mat and press it firmly against the surface. After drying of the preceding layer repeat this operation in order to obtain a greater stiffness. Make sure that the successive mats are 1cm larger each time. Sand after hardening with a very coarse sandpaper or a grinding wheel. Additionally apply a thin layer of Metal Plastic for a good finish.