Parquet Adhesive 1kg

Parquet Adhesive

Solvent free parquet adhesive

A ready to use solvent-free dispersion parquet adhesive. Suitable for bonding most common types of parquet onto highly absorbent substrates and also tapis floors on wooden subfloors.

Shown product

Parquet Adhesive 1kg

Other product variants

What are you looking for?

Applications

  • Suitable for indoor bonding of many types of wooden floors such as mosaic, wood or laminate parquet (up to max. 250 x 50 mm), tapis 6-8 mm (in combination with nails), multilayer or pre-finished parquet and laminates.
  • Suitable for indoor use on highly absorbent subfloors of wood, chipboard or OSB Board (large particle size chipboard) in combination with nails.

Featured properties

  • Easy to tool
  • High adhesive strength
  • Long open time.
  • Elastic adhesive layer
  • High end strength (shear strength according EN14293)
  • Hard elastic

Instructions

  • Acclimatise adhesive to room temperature before installation. Apply the adhesive by means of Soudal notched trowel n°3 to the surface. Do not apply more to the surface than can be covered with parquet within 30 minutes. Slide the parquet onto the adhesive layer and tap into place or tamp down with a rubber hammer. Min of 80% contact coverage required to ensure the adhesion of their parquet. If necessary load the parquet with weight. When bonding tapis onto a wooden subfloor the parquet must also be nailed. Wait at least 48 hours before sanding and finishing the parquet. In case of bonded and nailed tapis, wait at least 24hrs.